Latest frp tissue Tenders | Government frp tissue Tenders

Central Government And Public Sector

CTN :38919099

01 Feb, 2025 NA

Damanjodi - Odisha

Tender For supply of 3000010646_ 1_ 83002101160-loopin loopout box-ltg pole junction box loop in loop out junction box as per attached technical specificationwith following minimum requirement. frp material of thickness 4mm (min),04 no of ways(min)at bottomwith provisionof cable gland,08 nos(min) terminal connector of1100v grade and supporting cable size:25 sqmm max) (one) and 03nos of 4cx2.5sqmm copper cable.dimension of jb (wxhxd)mm:150x150x75mm. (minimum)overall dimension tolerance ( +in mm): 20 in w xh and 10 in dmaterial of junction box: fibre reinforced plasticdegree of protection: ip65 (as per is/iec 60529:2001 latest)safety compliances: fire retardant and self extinguishing ul-94 5vamaterial (sheet)minimum thickness (in mm): 4type of front cover fixing on junction box (front side): front cover with 4 nos. quarter turn tool operated locking knobs.provision of knock out for cable glands on junction box: yesno. of ways on jb: 4 (bottom side)shape of the jb: rectangular/squarevoltage grade of terminal block: 1100 v (min), 50 hz, ac number of terminal connector on junction box:8 terminal connector supporting for maximum size of conductor (in sq mm):4cx25sqmm al cable insulation resistance> 200 mohmtype of mounting: structural mounting/wall mounting accessories for each junction box: neoprene rubber gasket 1 no.high voltage withstand test (between all live parts connected together and the body):2 kv (rms) for 1 minute availability of test reports withcomplete drawings from central govt lab/nabl/ilacaccredited laboratory to prove conformity of the specification: yestest report number and date : party to furnishname and address of the lab: party to furnishagreed to furnish all the test reports and certificates to the buyer/consignee on demand: yes""all other specifications are as per annexure-1, party to submit theannexure -1 in complete filled up & signed condition failing whichthe offer will be technically rejected"

Central Government/Public Sector

CTN :38960668

20 Jan, 2025 NA

Kapurthala - Punjab

Tender For supply of door arrangement for control room of luggage cum brake van with unde rslung power pack, as per drawing: lr56101, packing instruction: frp ceiling sheet/side wall panels/frp component: self adhesive biodegradable plastic lamination sheet to be provi ded on each component. projected metallic parts to be protected with plastic/nylon/fr p caps/proper wrapping of biodegradable bubble sheet from all the sides. each compon ent to be packed in biodegradable bubble sheet all around with proper tapping & then t o be placed in cardboard box followed by 3 nylon strips tightened from both sides. th en collective packs of components to be packed in wooden cage made from wooden str ips of size 100x20mm & gap between each strip should not be more than 100mm.on the w ooden crate base 3 wooden pegs of size100x100mm(along the length) to be provided fo r ease in handling with fork lifter. roof ceiling (having curved surfaces) in addition to above packing should be stacked on a metallic frames before packing in the wooden bo xes. one package should not contain material belonging to more than one coach set & grouping should be preferably of similar sizes. also packing should have indication lik e 1/4,2/4 etc. ( e.g. four packings will make one coach set) so that one complete coach s et can be easly identified. the maximum weight of the wooden crate should not be mor e than 200 kgs. a list should be pasted on each wooden crate showing order no, plno, description of item,drg no/spec no/set list no. with version,qty,firm's name & address,d ate of despatch etc. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :38869319

18 Jan, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

State Government

CTN :38869323

18 Jan, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digital

Central Government/Public Sector

CTN :38922584

27 Jan, 2025 NA

Mumbai - Maharashtra

Tender For supply of window shutter complete, frp satin blue colour to icf drg. no. t-5-3-701 alt-t/27 , col- viii. material and specification:- rdso/2007/cg-02 rev.1 with amdt-3 of feb-2019 and for sill and gui de to spec. :- rdso/2007/cg-03 rev.1 amdt-3 of feb-2019. [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :38872137

07 Feb, 2025 NA

Bhubaneswar - Odisha

Tender For supply of frp door window arrangement with equalizing device, to drawing / specification no. rc f drg no.cc53001, alt-c, material & spec. as per drawing. [ warranty period: 30 months after the da te of delivery ]

State Government

CTN :38837221

21 Jan, 2025 29.35 Lacs

Raichur - Karnataka

Tender For supply, erection, testing and commissioning of induced draft, frp material cooling towers with v bar pvc fills including drift eliminator evaporative pads for unit-5,6,7 & 8 hvac system at rtps

Central Government/Public Sector

CTN :38554746

18 Jan, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : supply of frp shell for cooling tower cm , main angle frame for cooling tower cm , v support for cooling tower cm , frp fan assembly 1900 mm dia c.tower cm , pvc honey comb fills for c.tower cm , pvc s type drift eliminator for c.tower cm , s.s.mesh for fill and drift eliminator c.t. cm , pp spray nozzle c t wfs 1202 102 cm , hdg steel header pipe cm , pvc distribution pipe without headerpipe cm , fiber glass and resin material cm , motor base frame ms galvanized cm , ss fan guard wfo 1202 cm , ss 304 hardware for cooling tower cm , cooling tower wetbulb mcph part no.wfo 1403 154

CTN :38753056

30 Jan, 2025 4.26 Lacs

Kozhikode - Kerala

Tender For mhis 2024- 25 procurement of meteorological equipments- srg and fcs equipments in manual gauging stations for replacing the obsolete equipments under hydrology sub division, kozhikode - supplying of rain gauge - non recording, 1.1 conditions & requirements the rain gauge shall be of such a design that it operates reliably and accurately under the prevailing environmental and weather conditions. the rain gauge shall be easy to operate and maintain. the rain gauge shall be supplied with the accessories as needed for effective deployment. all materials on the rain gauge shall be non-corrosive. the locking ring shall be of rigid plastic the rain gauge shall have smooth and permanent surface finish to minimise evaporation losses. the minimum expected lifetime in open field shall be 15 years. all openings of the rain gauge shall be covered with stainless steel net to protect against any insects entering inside. the rain gauge shall comply with is 5225-19921.2 specifications i. 200 cm modelcollecting area 200 cm2id of rim 159.6 mmcollecting bottle 2 litresnominal capacity 100 mmrain measure for 10 mm rainfall, graduation etc. according to is 5225-1992ii. materialsbase and collector preferably frprim of collector aluminium or gun metaliii. accessories collecting bottles of 4 litres for 200 cm2 collector, supplying of sunshine recorder, 2.1 conditions & requirements the sunshine recorder and cards shall comply with is 7243-19742.2 specificationssize base 200 mm, sphere radius 79.6 mmbase good quality marble or similar stone, black or whitesphere uniform and well annealed glass and having a focal length of74.9 0.25 mmbowl tin bronzepivot brass sunshine cards, made of white paste boardproperties when dry after immersion inwater for 18 hours after dryinglength down board 127 mm 127 mm not less than 125.7 mmwidth across board 25.4 mm not more than 25.9 mm not less than 25.1 mmthickness 0.43 to not more than 0.76 mm 0.48 mm, supplying of counter type anemometer, 3.1 conditions & requirements the instrument shall be of such a design that it operates reliably and accurately under the prevailing environmental and weather conditions. the instrument shall be easy to operate and maintain. the instrument shall be supplied with the accessories as needed for effective deployment. all materials on the instrument exterior shall be non-corrosive. the instrument shall have an expected technical lifetime of not less than 10 years. an operator s manual, related to the type and model of the instrument, shall be part of the delivery. a suitable non-reset direct-drive revolution counter adding one count for each one- tenth revolution of the drive shaft in one direction shall be used. the ratio between gears shall be such that 1 count equals 100 m/s. the anemometer shall comply to is 5912-1970.3.2 specificationsi. sensing range 50 m/saccuracy up to 2.5 m/s, 0.25 m/sabove 2.5 m/s, 10% fsii. materialscups copper or aluminium sheet 0.71 mm thicknesscentre spindle stainless steel rodworm on spindle manganese bronze alloyworm wheel hard brass, supplying of hygrograph, hair string type, 4.1 conditions & requirements the general arrangement and main dimensions of the hair hygrograph and charts shallcomply with is 5900-1970.4.2 specificationsrange 0 to 100% rhaccuracy above 20%: 5% rhrecording resolution 0.2% rhhousing material frp or aluminiumrecording mechanism drum, driven by clockwork, supplying of thermograph, bimetallic type, 5.1 conditions & requirements the general arrangement and main dimensions of the thermograph and charts shallcomply with is 5901-19705.2 specificationsrange -20 to 60 caccuracy 1 crecording resolution 0.2 chousing material frp or aluminiumrecording mechanism drum, driven by clockwork, supplying of evaporimeter, us class a pan, 6.1 conditions & requirements the pan shall comply with is 5973 - 1998. civil works will be finalised in collaboration with the supplier.6.2 specificationsi. pansize 1.22 x 0.255 m (diameter x

CTN :38776122

20 Jan, 2025 NA

Malda - West Bengal

Tender For supply of track lead junction box (tljb) made from frp material including brass bolts and hylum boar d sheet with terminals etc. the technical specifications are as follows:(a) tljb complete with cover to be in black/red having approximate weight of 4.0 kg with l-262mm w-212mm and h 90 mm and all the holes re quired for mounting on frp stump (vertically two for each frp angle) hdpe pipe , cable etc.(b) each tljb s hall have two bakelite terminal block fitted horizontally : each bakelite terminal block shall have two nickel chrome plate m10 brass terminal, 50mm long. along with each tljb , nickel chrome plated brass links(two nos.0f adequate strength for vertical linking of the terminals to be supplied.(c) hdpe pipe of size 32/35mm , 380 mm long along with two nuts for fixing on the tljb hole .(d) the frp stump for mounting the tljb to b e made of one meter long 30mm x30mmx 4mm angle(2 nos.) and 300mm long 30mm x30mmx 4mm angl e(1 no.) fixed at 50 mm from the bottom using galvanized nuts and bolts. the tljb and the angles for stum p should come along with holes on them for fixing using galvanized nuts and bolts of adequate strength to be supplied along with tljb. as per cse/er/kkk, dockted no-sg/219/40, dtd-29.11.2024.a typical drawing no-.si/typ/0096(for frp based tljb ara type is attached. make- rambal or similar. [ warranty period: 3 0 months after the date of delivery ]

Frp Tissue Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors